Magnetic handling rod MMT 20 x 6

This type of rods can be used not only for sheet handling. It will make sheet loading in and unloading from presses easier and quicker. It will result in reduction of risk of hand injury caused with sheet. Magnetic handling rods also eliminate hand inserting under the press head.

This type of rods is replenished with the very strong rare-earth neodymium NdFeB magnet with the diameter 20 mm and is suitable for lightweight objects handling. For heavier objects, magnetic manipulation rod MMT 40 x 8 is a better choice; the rod is described below. The magnetic handling rod is also suitable for e.g. pulling burnt sheet components out.

Magnetic handling rod MMT 40 x 8

This type of rods is especially suitable for manipulation with sheetmetal slops. Due to the fact that it is replenished with a very strong magnet with big dimensions (the diameter is 40 mm), this handling rod may be used also in case of heavier objects.

Magnetic handling rods with SmCo magnets

For handling objects with a high temperature the rods were fit with very resistant SmCo magnets. These magnets have almost comparable power as NdFeB magnets, but their temperature resistance is up to 350 ° C!