What material separates

The above materials are only selected examples, consultation for the specific case is always important.

Write to us

Do you have a question or are you interested in a non-binding offer?

Kontaktujte přímo technika

Michal Haničinec

separatory@magsy.cz +420 577 220 497

Magnetic plates above conveyor

Magnetic plate (MD)

This variant of magnetic separator located above conveyor can be selected in the event that occurrence of magnetic particles of dirt is not so extensive and this magnet can be cleaned manually at least once during a working shift. In the event that dirt would not be removed from the magnet regularly, the magnetic force would be in steps reduced considerably.

Benefits consist in a simple installation that does not require any modifications of the design of the conveyor belt and the possibility to approach the separator as close to the material transported as possible, thus achieving maximum utilization of magnetic lines of force.

Magnetic plate location above the conveyor

Hang the magnetic board using lifting lugs situated above the conveyor belt. As a standard, magnetic boards are fitted with ferrite magnets. By request we can also use very strong rare-earth NdFeB magnets. Also by request we are prepared to manufacture magnetic boards with any dimensions.

Magnetic plates in stock

At any time we offer magnetic plates in three versions for an immediate pick up. In case you are interested in a plate, please contact us.

Magnetic plate dimensions and characteristics

	Model 1 62001	Model 2 62002	Model 3 62003
For a conveyor with a width of	500 mm	650 mm	800 mm
Length (A)	610 mm	738 mm	835 mm
Width (B)	496 mm	583 mm	667 mm
Height (C)	206 mm	219 mm	219 mm
Span (D)	450 mm	590 mm	695 mm
Span (E)	400 mm	475 mm	560 mm
Weight	260 kg	465 kg	615 kg
Functional height	100 mm	120 mm	180 mm
Caught object weight	0.1 – 25 kg

A useful tip for you – even more efficient metal separation on a conveyor belt

Magnetic plate location above the conveyor

In order to achieve a maximum separation efficiency, during metal separation from a higher material layer on a conveyor belt, we recommend to use – except a magnetic plate or a separator situated above a conveyor (1) – also magnetic roller (2). The device is capable of separating metals from the lower layer part.