It is used as a base coat. The coat contains very small iron particles due to what it gains magnetic-board function so magnets are firmly attached to it. By the coat repeating, its adhesion gets pronounced. The coat can be further covered by a coating color so the magnetic surface could become harmonized with its surrounding. Surface treated this way serves as a magnetic board.

Magnetic color is a dark-grey color containing iron particles due to which the magnets may adhere to the coat. It can be re-painted using any color to be used with walls and/or boards; the shade depends on your choice.   or interior use only.

Using:

Prior to using stir the paint thoroughly. Prepare the wall surface as for a common emulsion paint – the smoother surface, the better the magnet will hold on it.

Do not dilute!

To achieve a smooth final color coat surface, the final magnetic color coat may be slightly polished – after it was drying for at least 24 hours.

Drying time at 23°C is approximately 2 hours.

This magnetic color may be re-painted after ca 4-6 hours. Clean the brushes and accessories using water.

Warning:

• Keep out of reach of children!
• Use only outside, or in well ventilated areas!
• Use protective gloves, protective cloth, eye protection.
• Dispose the content / package as a dangerous waste on a waste collection point, in compliance with the local, regional, national and/or international legislation.
• EU limit value for this product (A/a category): 30 g/l (2010). The product contains 30 g/l VOC at maximum.